Ordering information

Product codeDescription
DA1010-IN-1Indoor 10Ah MidspanUPS 1 x 30W PoE+ injector
DA1010-IN-2Indoor 10Ah MidspanUPS 2 x 30W PoE+ injector
DA1010-IN-4Indoor 10Ah MidspanUPS 4 x 30W PoE+ injector
DA1010-IN-1-GIndoor 10Ah MidspanUPS 1 x 30W Gigabit PoE+ injector
DA1010-IN-2-GIndoor 10Ah MidspanUPS 2 x 30W Gigabit PoE+ injector
DA1010-IN-4-GIndoor 10Ah MidspanUPS 4 x 30W Gigabit PoE+ injector
Where to buy

Indoor 10Ah MidspanUPS


The DA1010-IN 10Ah MidspanUPS PoE injector is ideal for indoor environments where up to four devices require PoE power up to 30W each. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

One, two or four output versions are available. Each output has an RJ45 data port,(e.g. from the network switch) and an RJ45 load port for the PoE device, that outputs the data and power.

Outputs have LED indication to show if a compatible device is connected and powered. In addition there are SPCO clean contacts for monitoring the power status of each output. The unit also has power on LED indication and SPCO clean contacts to signal power failure.

Estimated stand-by times

Output loadBattery capacity
5W9 Hours65 Hours100 Hours
12W4 Hours30 Hours44 Hours
25W1.75 Hours14.5 Hours20 Hours
50W40 Minutes6.5 Hours9.5 Hours
75W23 Minutes4 Hours6 Hours
100W14 Minutes2.75 Hours4 Hours

Where to buy

SecurePoE is available from all good stockists. A selection of some of the approved distributors is listed here.