Midspan & MidspanUPS™ rack-mount SecurePoE
This rack-mount range of SecurePoE models is just 1U in height. MidspanUPS & MultispanUPS models include a remote battery pack for greater installation flexibility.
This rack-mount range of SecurePoE models is just 1U in height. MidspanUPS & MultispanUPS models include a remote battery pack for greater installation flexibility.
The DA1000-RM Midspan PoE injector is ideal for indoor environments where up to eight devices require up to 30W each of PoE power. With four or eight through-port models available, you can connect devices to be powered with or without a data connection.
Gigabit and 10/100Mbs versions are available.
The DA1001-RM Midspan PoE injector is ideal for indoor environments where up to eight devices require up to 30W each of reliable, battery-backed, PoE power. With four or eight through-port models available, you can connect devices to be powered with or without a data connection.
Gigabit and 10/100Mbs versions are available.
The 1.2Ah back-up battery is ideal for preventing devices from re-booting during minor mains power faults and fluctuations. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
The DA1007-RM Midspan PoE injector is ideal for indoor environments where up to eight devices require up to 30W each of reliable, battery-backed, PoE power. With four or eight through-port models available, you can connect devices to be powered with or without a data connection.
Gigabit and 10/100Mbs versions are available.
Maintain 7Ah of PoE power to devices such as VoIP telephony and intercoms during mains power faults and failures. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
The DA1010-RM Midspan PoE injector is ideal for indoor environments where up to eight devices require up to 30W each of reliable, battery-backed, PoE power. With four or eight through-port models available, you can connect devices to be powered with or without a data connection.
Gigabit and 10/100Mbs versions are available.
These larger units maintain 10Ah of PoE power to devices during long power interruptions and major faults. The 10Ah stand-by battery pack will maintain a 20W load for approximately 20 hours or small 5W devices for up to 100 hours after a power failure. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
This rack-mount range of SecurePoE models is just 1U in height. MidspanUPS & MultispanUPS models include a remote battery pack for greater installation flexibility.
The DA1100-RM Multispan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. You can connect devices to be powered with or without a data connection and any spare ports of the 5-port network switch can be used for other network devices.
All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to multiple ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.
Gigabit and 10/100Mbs versions are available.
All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.
The DA1101-RM Multispan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. You can connect devices to be powered with or without a data connection and any spare ports of the 5-port network switch can be used for other network devices.
All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to multiple ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.
Gigabit and 10/100Mbs versions are available.
All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.
The 1.2Ah back-up battery is ideal for preventing devices from re-booting during minor mains power faults and fluctuations. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
The DA1107-RM Multispan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. You can connect devices to be powered with or without a data connection and any spare ports of the 5-port network switch can be used for other network devices.
All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to multiple ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.
Gigabit and 10/100Mbs versions are available.
All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.
Maintain 7Ah of PoE power to devices such as VoIP telephony and intercoms during mains power faults and failures. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
The DA1110-RM Multispan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. You can connect devices to be powered with or without a data connection and any spare ports of the 5-port network switch can be used for other network devices.
All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to multiple ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.
Gigabit and 10/100Mbs versions are available.
All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.
These larger units maintain 10Ah of PoE power to devices during long power interruptions and major faults. The 10Ah stand-by battery pack will maintain a 20W load for approximately 20 hours or small 5W devices for up to 100 hours after a power failure. The main unit itself requires just 1U of rack space. The remote battery pack, connected via a tamper-looped lead, can be installed in or near the rack cabinet as needed.
Available as a free-of-charge PDF download (Click here to download) or hard copy, the quick look-up guides cover Dantech’s extensive range of PoE power supplies, indicating key product features and bullet-pointed benefits.